United States Department of Transportation - Federal Highway Administration FHWA HomeFeedback
safety Back to Road Safety Audits (RSA)

FHWA Road Safety Audit Guidelines

Previous Page | Next Page

Road Safety Audits Logo

Part B: The Road Safety Audit Process

7.0 Post-construction Road Safety Audits

RSAs in the post-construction phase (referred to here as an RSA of existing roads) will have a different focus from a traditional safety review or investigation of crash history.

7.1 RSA of Existing Roads

Traditional safety reviews and investigations of crash history rely primarily on crash data to determine what safety issues are occurring at the site. They are reactive as they mainly identify safety issues after a crash or pattern of crashes have occurred and are often initiated in response to an unusually high number of crashes occurring along a section of road or at a particular intersection or interchange.

What is the purpose of an RSA on existing roads?

In contrast, RSAs of existing roads rely mainly on the site visit, as-built design drawings (if kept up to date), and other project data (e.g., previous reports) to determine what safety issues are expected to arise at the site. This will provide the RSA team with an accurate picture as to the level of safety on the road. For this reason, RSAs are proactive as they can identify where crashes will likely occur and what will be their resultant severity. Crash data, if available, should be used to supplement any findings made as a result of the site visit and review of project data. However, the RSA team may choose not to examine the crash history until after the project data review and site visit have been completed so that their evaluation is not biased by the crash data. Also, crash data is often dated and does not always help in determining emerging operational trends or safety issues at a location.

The following project data may be provided to/requested by the RSA team:

Range of scope for existing road RSAs.

RSAs of existing roads may vary in scope. Three different, commonly-conducted types of RSAs on existing roads are as follows:

Observing driver behavior during the field visit.

Photo showing a young girl on a bicycle stopped at and intersection.

When conducting RSAs of existing roads, the RSA team will have the advantage over pre-construction and construction phase audits in that they may not only observe the various road features and how they complement each other but also see how road users are interacting with the road facility. They may observe incidents of driver behavior that suggest something inherently wrong, misleading, or absent in the road design. Vulnerable road users (e.g. elderly drivers or pedestrians, visually impaired pedestrians, children) may be observed having particular difficulty negotiating through a site being investigated. Alternatively, they may observe motorists committing traffic offenses (e.g. excessive speed, red light running, failing to yield to pedestrians) and may suggest an enforcement or education-based treatment.

Examining physical evidence of past crashes and off-road excursions.

Another advantage of conducting RSAs of existing roads over RSAs in the pre-construction or construction phase is the RSA team's ability to observe physical evidence of past crashes and off-road excursions, such as:

Photo showing two people from a Road Safety Audit team inspecting a damaged guide rail.

Such evidence will assist in diagnosing possible areas of elevated safety risk. Where damage has occurred such that a roadside feature has been compromised, this should be noted and reported in the audit as a maintenance concern.

For RSAs of existing roads, unless otherwise directed by the project owner, all roadway and roadside features or elements are to be considered as within the scope of the RSA , as in a detailed design stage RSAs.

Another feature of RSAs of existing roads is that, at the outset, the RSA team will want to consider whether the road facility under review has the same function and classification as it did when it was originally designed and constructed. Changes in traffic volume, vehicle mix, increased presence of vulnerable road users, or adjoining land use developments may have rendered the original classification and design of the facility obsolete. Standards, policies and guidelines may be a starting point for the RSA team in identifying roadway/roadside elements or features that are no longer consistent with the function and classification of the road, and are potentially posing a risk to road users.

Previous Page | Next Page

back to top


FHWA
Office of Operations FHWA Safety Home