U.S. Department of Transportation
Federal Highway Administration
1200 New Jersey Avenue, SE
Washington, DC 20590

Skip to content
Facebook iconYouTube iconTwitter iconFlickr iconLinkedInInstagram


FHWA Home / Safety / Proven Safety Countermeasures / Bicycle Lanes

Bicycle Lanes

Most fatal and serious injury bicyclist crashes occur at non-intersection locations. Nearly one-third of these crashes involve overtaking motorists1; the speed and size differential between vehicles and bicycles can lead to severe injury. To make bicycling safer and more comfortable for most types of bicyclists, State and local agencies should consider installing bicycle lanes. These dedicated facilities for the use of bicyclists along the roadway can take several forms. Providing bicycle facilities can mitigate or prevent interactions, conflicts, and crashes between bicyclists and motor vehicles, and create a network of safer roadways for bicycling. Bicycle Lanes align with the Safe System Approach principle of recognizing human vulnerability—where separating users in space can enhance safety for all road users.


FHWA’s Bikeway Selection Guide and Incorporating On-Road Bicycle Networks into Resurfacing Projects assist agencies in determining which facilities provide the most benefit in various contexts. Bicycle lanes can be included on new roadways or created on existing roads by reallocating space in the right-of-way.

In addition to the paint stripe used for a typical bicycle lane, a lateral offset with painted buffer can help to further separate bicyclists from vehicle traffic. State and local agencies may also consider physical separation of the bicycle lane from motorized traffic lanes through the use of vertical elements like posts, curbs, or vegetation.2 Based on international experience and implementation in the United States, there is potential for further safety benefits associated with separated bicycle lanes. FHWA is conducting research on separated bicycle lanes, which includes the development of crash modification factors, to be completed in 2022 to address significant interest on this topic.


The following are considerations to adding a bicycle lane by reducing lane and shoulder widths:

  • City and State policies may require minimum bicycle lane widths, although these can differ by agency and functional classification of the road.
  • Bicycle lane design should vary according to roadway characteristics (e.g., motor vehicle volumes and speed) in order to maximize the facility’s suitability for riders of all ages and abilities and should consider the travel needs of low-income populations likely to use bicycles. The Bikeway Selection Guide is a useful resource.
  • While some in the public may oppose travel lane narrowing if they believe it will slow traffic or increase congestion, studies have found that roadways did not experience an increase in injuries or congestion when travel lane widths were decreased to add a bicycle lane.3
  • Studies and experience in US cities show that bicycle lanes increase ridership and may help jurisdictions better manage roadway capacity without increased risk.
  • In rural areas, rumble strips can negatively impact bicyclists’ ability to ride if not properly installed. Agencies should consider the dimensions, placement, and offset of rumble strips when adding a bicycle lane.4
  • Strategies, practices, and processes can be used by agencies to enhance their ability to address equity in bicycle planning and design.5


1. Thomas et al. Bicyclist Crash Types on National, State, and Local Levels: A New Look. Transportation Research Record 673(6), 664-676, (2019).

2. Separated Bike Lane Planning and Design Guide. FHWA-HEP-15-025, (2015).

3. Park and Abdel-Aty. “Evaluation of safety effectiveness of multiple cross sectional features on urban arterials”. Accident Analysis and Prevention, Vol. 92, pp. 245-255, (2016).

4. FHWA Tech Advisory Shoulder and Edge Line Rumble Strips, (2011).

5. Sandt et al. Pursuing Equity in Pedestrian and Bicycle Planning. FHWA, (2016).

6. Avelar et al. Development of Crash Modification Factors for Bicycle Lane Additions While Reducing Lane and Shoulder Widths. FHWA, (2021).

Safety Benefits:

Bicycle Lane Additions can reduce crashes up to:


for total crashes on urban 4-lane undivided collectors and local roads.6


for total crashes on urban 2-lane undivided collectors and local roads.6

Separated bicycle lanes may provide further safety benefits. FHWA is anticipating completion of research in Fall 2022.

Photo: This photograph, taken from the edge of the roadway, shows three bicyclists traveling in a buffered bicycle lane toward the foreground of the image in an urban setting. To the left of the bicycle lane are two general travel lanes with on-street parking. The bicycle lane is separated from the roadway with white pavement markings and vertical posts. The bicycle lane is marked with a helmeted bicyclist symbol and directional arrow. To the right of the bicycle lane is concrete curb and sidewalk.

Separated bicycle lane in Washington, DC.
Source: Alex Baca, Washington Area Bicyclist Association (WABA)

Guidance Memos NEW

Read the Guidance Memoranda on Promoting the Implementation of Proven Safety Countermeasures.

2021 | 2017 | 2012 | 2008

Page last modified on October 28, 2021
Safe Roads for a Safer Future - Investment in roadway safety saves lives
Federal Highway Administration | 1200 New Jersey Avenue, SE | Washington, DC 20590 | 202-366-4000