U.S. Department of Transportation
Federal Highway Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
202-366-4000
This listing contains breakaway luminaire supports that have been issued an Eligibility Letter by FHWA. The FHWA's Federal-aid eligibility letters are provided as a service to the States and are not a requirement for roadside safety hardware to be eligible for Federal-aid reimbursement. As stated in our eligibility letters, "eligibility for reimbursement under the Federal-aid highway program does not establish approval, certification or endorsement of the device for any particular purpose or use." It is the responsibility of the agency who owns the facility to determine whether or not to use a particular hardware device and how to use it for the particular situation. See AASHTO's Roadside Design Guide and AASHTO's Manual for Assessing Safety Hardware for guidance on selecting the appropriate Test Level (TL) based on traffic using the facility.
For further information, please refer to AASHTO Task Force 13 Guide for Luminaire Supports.
Revised, April 8, 2020
| Code | Date | Manufacturer | Device Description | View PDF | Text Version |
|---|---|---|---|---|---|
| LS-78 | 11/30/2012 | Main Street Lighting | Fiberglass light pole 12.75 foot height |  (777 KB) |
 |
| LS-76 | 11/1/2012 | HAPCO | HAPCO 67238A Coupling with 2 washers | (425 KB) |
|
| LS-75 | 8/18/2011 | Valmont | 2-Piece Cast Aluminum Base | (417 KB) |
|
| LS-74 | 9/9/2011 | HAPCO | Various breakaway bases and decorative covers for lighting and luminaire support posts as described below | (1.24 MB) |
|
| LS-73 | 6/23/2011 | MWRSF | Brass couplings for luminaire supports | (173 KB) |
|
| LS-72* | 3/30/2011 | Valmont Industries, Inc. | Valmont Decorative Clamshell Base Covers | (1.23 MB) |
|
| LS-71 | 1/31/2011 | Akron Foundry Company | Cast Aluminum Transformer Bases | (66 KB) |
|
| LS-70 | 2/9/2011 | Akron Foundry Company | Cast Aluminum Breakaway Transformer Bases | (128 KB) |
|
| LS-69 | 10/29/2009 | Hapco | Decorative Poles - B15366 (Casting 79419) | (329 KB) |
|
| LS-68 | 2/27/2009 | Shakespeare Products | decorative poles | (1.13 MB) |
|
| LS-67 | 5/30/2008 | Dynamic Lighting Systems | Decorative Luminaire Poles | (2.37 MB) |
|
| LS-66 | 5/5/2008 | Hapco | Decorative Poles 6inch dia, cast base assembly and direct embedded. | (1.29 MB) |
|
| LS-65 | 10/9/2007 | Hapco | Tapered 10 inch diameter Aluminum tube with breakaway joint. | (2.31 Mb) |
|
| LS-64 | 8/20/2007 | Hapco | Decorative Lighting Poles | (2.23 MB) |
|
| LS-63 | 12/15/2006 | Akron Foundry | F-1300 Breakaway Cast Aluminum Transformer Base | (204 Kb) |
|
| LS-62 | 12/15/2006 | Akron Foundry | CS-300 Breakaway Cast Aluminum Transformer Base | (194 Kb) |
|
| LS-61 | 12/15/2006 | Akron Foundry | TB-9 Breakaway Cast Aluminum Transformer Base | (194 Kb) |
|
| LS-60 | 4/2/2007 | Seco Signal Equipment Co. | Seco South System designed to safely disconnect and de-energize power supply. | (299 KB) |
|
| LS-59 | 1/4/2006 | Component Products | Cast Aluminum Pedestal Bases | (195 Kb) |
|
| LS-58 | 2/8/2005 | Akron Foundry | Cast Aluminum Transformer Base | (207 Kb) |
|
| LS-57r | 7/23/2004 | Akron Foundry | TB1-17 breakaway cast aluminum transformer base | (54 Kb) |
|
| LS-57 | 4/19/2003 | Akron Foundry | TB1-17 breakaway cast aluminum transformer base | (8 Kb) |
|
| LS-56 | 11/13/2003 | Akron Foundry | T-Base breakaway cast aluminum | (8 Kb) |
|
| LS-55 | 11/13/2003 | Akron Foundry | TB2-17 breakaway cast aluminum transformer base | (19 Kb) |
|
| LS-54 | 6/6/2003 | Component Products, Incorporated | Cast Aluminum pedestal bases | (12 Kb) |
|
| LS-53 | 6/6/2002 | Akron Foundry | TS-1000 Threaded Traffic Signal Pedestal Base and TS-1000 Modified Threaded Traffic Signal Pedestal Base | (931 Kb) |
|
| LS-52 | 6/11/2002 | Valmont Industries, Inc. | Breakaway Coupling | (722 Kb) |
|
| LS-51 | 1/11/2002 | Foster Miller | Utility Pole breakaway coupling Guy wire | (272 Kb) |
|
| LS-50 | 8/29/2001 | DE Technologies, Inc. | Energy Absorbing Composite Utility Pole | (178 Kb) |
|
| LS-49 | 11/28/2000 | UTD, Inc. | UTD Safety Link | (207Kb) |
|
| LS-47 | 11/19/1997 | Akron Foundry | TS-1000 and TS-1000Modified threaded traffic signal bases | No PDF version is available | No Text version is available |
| LS-46 | 2/24/1997 | Region 7 | Nebraska and South Dakota Road Closure Gate | (1.43 MB) |
No Text version is available |
| LS-45B | 1/16/1997 | Transpo Industries | Production Model of Double Neck Pole Safe Coupling | (542 Kb) |
No Text version is available |
| LS-45A | 4/29/1996 | Transpo Industries | (LS 45 and ls45A are for the Prototype coupling) | (542 Kb) |
No Text version is available |
| LS-45 | 3/5/1996 | Transpo Industries | Double Neck Pole Safe Coupling for signs and luminaires. | (542 Kb) |
No Text version is available |
| LS-44B | 4/2/1997 | Valmont | Use of ASTM A574 fasteners in above coupling | (427 Kb) |
No Text version is available |
| LS-44A | 2/24/1997 | Valmont | Production Model of above Breakaway Coupling | (427 Kb) |
No Text version is available |
| LS-44 | 5/28/1996 | Valmont | Breakaway Coupling / Miniature four-bolt slip base | (427 Kb) |
No Text version is available |
| LS-43 | 8/30/1995 | P&K Pole Products | SB-2g Cast Al. Shoe Base for Slotted Al. Shaft, 12" BC | (36 Kb) |
No Text version is available |
| LS-42 | 8/30/1995 | P&K Pole Products | SB-3G Cast Aluminum Call Box Base, 8.5" BC | (55 Kb) |
No Text version is available |
| LS-41 | 8/30/1995 | P&K Pole Products | TB-2A Cast Aluminum Transformer Base, 15" BC | (298 Kb) |
No Text version is available |
| LS-40 | 8/30/1995 | P&K Pole Products | TB-2CBA Cast Al.Transformer Base for 10" Poles, 15" BC | (315 Kb) |
No Text version is available |
| LS-39 | 8/30/1995 | P&K Pole Products | BA-3 Cast Al. Breakaway Base for 10" Poles, 15" BC | (196 Kb) |
No Text version is available |
| LS-38 | 8/4/1995 | Component Products | CPI-BAS-1 Cast Al. Breakaway Base for signals, 14" BC | (190 Kb) |
No Text version is available |
| LS-37 | 7/13/1995 | P&K Pole Products | SB-2AFG Cast Al.Breakaway Base for 10" Poles | (217 Kb) |
No Text version is available |
| LS-36 | 4/24/1995 | --- | Wyoming Road Closure Gate | (162 Kb) |
No Text version is available |
| LS-35 | 2/16/1995 | Hapco Division | "X"and"Y"extruded al.slip bases, 11" & 15" BC | (365 Kb) |
No Text version is available |
| LS-34 | 10/5/1993 | Millerbernd Manufacturing | Progressive Shear Bases 40C63 and 40C49 on stainless, high carbon, and CORTEN A poles | (537 Kb) |
No Text version is available |
| LS-33 | 10/12/1993 | Manitoba Safe-T-Base | Cast iron breakaway couplings | (238 Kb) |
No Text version is available |
| LS-32 | 9/3/1993 | Hapco Division | Cast Al.Shoe Bases TP3405 & TP3406, 9&12" BC | (311 Kb) |
No Text version is available |
| LS-31 | 6/17/1993 | Syro Steel | ADD. Breakaway Timber Utility Pole (Four-bolt slip base) | (298 Kb) |
No Text version is available |
| LS-30 | 1/27/1993 | -- | FHWA Breakaway Timber Utility Pole (Operational) (Six-bolt slip base) | (464 Kb) |
No Text version is available |
| LS-29 | 4/26/1993 | Hapco | Extruded Al.Bases A73089, A73088, 11" & 15" BC | (310 Kb) |
No Text version is available |
| LS-28 | 7/27/1992 | Adian Engineering | Adian Breakaway Base for Luminaire Supports Model TB-01, 16" to 17" B | (163 Kb) |
No Text version is available |
| LS-27A | 9/1/1992 | Hapco Division | Change in handhole dimensions | (61 Kb) |
No Text version is available |
| LS-27 | 7/20/1992 | Hapco Division | Breakaway Aluminum Shoe Base, 11" BC | (61 Kb) |
No Text version is available |
| LS-26B | 4/18/1997 | Sherman International | Additionl poles accepted | (854 Kb) |
No Text version is available |
| LS-26A | 3/15/1996 | Sherman International | Additonal poles accepted | (854 Kb) |
No Text version is available |
| LS-26 | 6/10/1992 | Sherman International | Direct Burial Breakaway Fiberglass Luminaire Supports | (854 Kb) |
No Text version is available |
| LS-25 | 10/10/1991 | Utah DOT | Four-bolt luminaire slip base. | (169 Kb) |
No Text version is available |
| LS-24 | 7/22/1991 | Akron Foundry | Revisions to TB-1, TB-2, TB-3 Cast aluminum transformer bases | (237 Kb) |
No Text version is available |
| LS-23A | 11/20/1992 | PrecisionForm | Supplement Removes Certain Conditions | (155 Kb) |
No Text version is available |
| LS-23 | 2/7/1991 | PrecisionForm | Revision to PF200-1 breakaway coupler. | (155 Kb) |
No Text version is available |
| LS-22 | 9/19/1990 | Akron Foundry | Chart summarizing approval letters ls2, ls4, ls9, ls15, ls19 | (714 Kb) |
No Text version is available |
| LS-21 | 9/7/1990 | Shakespeare Products | Fiberglass poles ASW27 thru ASW35 and AHW27 thru AHW35 with Al shoe base | (833 Kb) |
No Text version is available |
| LS-20 | 8/20/1990 | Union Metal | A2849 Al Transformer Base, 15" BC | (123 Kb) |
No Text version is available |
| LS-19 | 8/6/1990 | Akron Foundry | TB-3-17, TB-5-9, TB-6-9 Transformer Bases, 11.5 to 15.5" BC | (526 Kb) |
No Text version is available |
| LS-18 | 8/6/1990 | Akron Foundry | F-1300 and F-1302 Al Transformer Bases (tests of Pole Lite bases) | (343 Kb) |
No Text version is available |
| LS-17 | 8/6/1990 | Akron Foundry | CS-300 and CS-370 Al Transformer Bases (tests of Feralux bases) | (392 Kb) |
No Text version is available |
| LS-16 | 6/29/1990 | Valmont Industries | Slip Base specifications | (434 Kb) |
No Text version is available |
| LS-15 | 5/30/1990 | Akron Foundry | TB-2 Al Transformer base, 12" B.C. TB-1 Al Transformer base, 950# pole. | (370 Kb) |
No Text version is available |
| LS-14 | 5/30/1990 | Valmont Industries | Cast Al transformer base No. 0283093 15 inch maximum bolt circle | (238 Kb) |
No Text version is available |
| LS-13 | 5/29/1990 | P&K Pole Products | 10" slipbase | (325 Kb) |
No Text version is available |
| LS-12 | 5/14/1990 | P&K Pole Products | 7" & 8" Al shoe bases, 10" slip base | (519 Kb) |
No Text version is available |
| LS-11 | 5/15/1990 | Union Metal | A2850-C1R10 Al Transformer Base 12.5 inch maximum bolt circle | (114 Kb) |
No Text version is available |
| LS-10 | 2/26/1990 | Precision Form | PrecisionForm Coupler PFI 200-1 for poles weighing no more than 800#. | (184 Kb) |
No Text version is available |
| LS-09 | 1/24/1990 | Akron Foundry | TB-2 and TB-3 Al Transformer Bases (TB-2 B.C. increased via ls15) | (270 Kb) |
No Text version is available |
| LS-08 | 1/11/1990 | Transpo Industries | Pole-Safe breakaway couplings for Conventional luminaire supports weighing no more than 900#. | (987 Kb) |
No Text version is available |
| LS-07 | 11/8/1989 | Shakespeare Products | Fiberglass poles, series AA,AB,AC,AD on Transpo Safety 201 or 301couplings. Pole heights of 39' to 47'. | (770 Kb) |
No Text version is available |
| LS-06A | 3/5/1990 | Shakespeare Products | Extrapolate acceptance to higher poles | (390 Kb) |
No Text version is available |
| LS-06 | 4/4/1989 | Shakespeare Products | Direct Burial Fiberglass Light Poles Series BH20, BH24, BH30, BH35, BS30, BS35, BX30, BX35, BA41, BA47, BB30, BB35, BB41, BB47, BC30, BC35, BC41, BC47 | (390 Kb) |
No Text version is available |
| LS-05 | 3/14/1989 | Hapco Division | Impact Safety Coupling 67238 | (114 Kb) |
No Text version is available |
| LS-04 | 1/12/1989 | Akron Foundry | Reaffirmation of TB1 bases, 10.5" to 15" BC | (262 Kb) |
No Text version is available |
| LS-03 | 6/24/1988 | Union Metal | Cast Aluminum Base A2940, 14.5" BC | (214 Kb) |
No Text version is available |
| LS-02 | 6/29/1988 | Akron Foundry | TB Series AL Transformer (TB1-AF 1315-17 and modifications) (See ls4) | (292 Kb) |
No Text version is available |
| LS-01A | 11/10/1988 | Sherman International | Extend acceptance to range of poles | (333 Kb) |
No Text version is available |
| LS-01 | 6/15/1988 | Sherman International | Fiberglass Luminaire Support MB 36-D-50-56 | (333 Kb) |
No Text version is available |
